If you’re in the market for an organic mattress that’s bouncy and supportive, you may want to consider the Brentwood Latex Hybrid. Built with layers of pocketed coils, recycled materials, and latex foam, this bed is as cozy as it is good for the environment. But, is it the one for you?
To find out, I invite you to check out my full review of the Brentwood Latex Hybrid mattress. I personally tested this bed, so can provide you with all the construction, feel, and competition insights you need to make an informed buying decision.
So, let’s get into my review! And if you’re short on time, you can always jump right to my review summary at the end of this page.
Brentwood Home is a California-based bedding brand that specializes in organic products for the eco-friendly sleeper. In addition to the Brentwood Latex Hybrid, the company also sells other mattresses, yoga gear, sheets, quilts, and more!
Though we won’t be getting into these other products today, we will take some time later on to compare the Brentwood Latex Hybrid to two of its mattress siblings: the Brentwood Cedar and Oceano.
But before we do any of that, let’s take a peek inside this bed!
What is the Brentwood Latex Hybrid Mattress Made of?
I’m particularly excited about digging into the Brentwood Latex Hybrid construction because it features a ton of interesting organic materials, such as upcycled denim, performance fibers from recycled water bottles, and flax seed pads. There’s also organic wool, all-natural latex, and pocketed coils at play, which promise to make this one dynamic structure.
To see how all this comes together, let’s dive into the mattress layer by layer.
Cover – Things kick off with a quilted cover of wool and cotton. This material has a plush feel to it, bringing some immediate comfort to the bed. I should also add that wool is naturally moisture-wicking, which could be great news for hot sleepers.
Comfort – Beneath the cover, you’ll land on a thick section of latex foam, which is bouncy, naturally cooling, and soft to the touch. Though latex is a popular bedding material, Brentwood has set its own apart by zoning the foam for support. What this means is that the layer has been divided into three different firmness zones, with firmer foam at the hips for a little lift and softer foam at the shoulders for a little give. The intent is to provide uniform support across the body, thereby lifting the spine into a nice, even line. One small note is that the foam at the shoulders is ridged, which might bother some sleepers.
Transition – Next up, you’ll find a flax seed fiber pad, which has been included to help transition the sleeper from the gentle latex foam into the firmer coils below. You’re not likely to notice this layer too much, but it should help make for a more balanced vibe as you press into the bed.
Support – The bulk of the mattress is made up of this support section of individually wrapped coils, all of which have been repurposed from recycled steel. Firm, bouncy, and supportive, this pocketed coil system brings a lot of heft to the structure, working to position the sleeper more on top of the bed than in it.
Base – The base layer of the mattress is made up of the upcycled denim I mentioned earlier. This section mainly functions to give the coils above it something off of which to bounce.
How Does the Brentwood Latex Hybrid Mattress Feel?
Now that we’ve fully assessed the bed’s construction, let’s take a look at how it actually feels, starting with firmness.
As with any feel factor, firmness is subjective, so may change depending on one’s body size, weight, or shape. Therefore, my interpretation of this bed’s firmness could very well differ from your own! For reference, I’m 5’10”, 190 lbs., and prefer to sleep on my stomach.
After giving it a solid toss and turn, I’d say the Brentwood Latex Hybrid is about a 6/10 on the firmness scale. When compared to the industry standard of 6.5 for medium firmness, it seems this bed is on the slightly softer side of things.
This mattress got a 6 from me because I think it hits a real sweet spot between pressure relief and support. Though the pocketed coil system does produce some nice bounce and firmness, it doesn’t counteract the gentleness of the quilted cover or zoned latex foam. In fact, the materials work together to establish a balanced feel that could work well for a number of different sleepers. We’ll explore pressure relief and recommendations more below, but I’ll say for now that I think this could be a solid pick for folks who switch between their back and side in the night!
Testing the Brentwood Latex Hybrid Mattress
While important, firmness is far from the only attribute to consider when buying a new mattress. So, let’s examine this bed for two more measures: Pressure Relief and Motion Transfer.
First up, let’s consider this bed’s pressure relief. When we think about pressure relief, we’re mostly concerned with how well (or not well) the mattress is able to alleviate tension at the shoulders, hips, and lower back. If you struggle with aches and pains in the night, this could be a crucial section for you.
To test out this bed’s pressure relief, we’re going to use a pressure map. This device allows me to track the force I’m exerting on the structure so you can see exactly where areas of pressure pop up. For reference, the map works on a gradient from blue (no discernible pressure) to red (very high pressure).
Back – As you’ll see on the map, I didn’t experience too much pressure in this position! In fact, I’d say that back sleeping was quite cozy on the Brentwood Latex Hybrid. Not only were my hips lifted on top of the bed, but the latex foam did a nice job of cushioning my lower back.
Side – You can detect a bit of pressure at my shoulders, but I’d still say the Latex Hybrid felt comfortable in this position. I wouldn’t recommend this bed for strict side sleepers necessarily, but if you switch between your back and side in the night, this could be a nice pick for you.
Stomach – Of all the positions, stomach sleeping was my least favorite. Stomach sleepers tend to prefer firm structures that lift the hips in line with the shoulders, which this bed didn’t necessarily do. The longer I laid on the Latex Hybrid, the more I could feel my hips dipping out of alignment with the rest of my spine.
The final test that we’re going to run is one for motion transfer. This measure refers to the amount of movement detectable from one side of bed to the other. Basically, it’ll tell you whether or not your bed mate’s tossing and turning will disrupt your sleep.
To illustrate this motion transfer, I dropped a 10 lb. steel ball from heights of 4 inches, Eight inches and 12 inches and measured the disturbance it caused: the bigger the lines, the bigger the disturbance.
These motion transfer results are just okay in my opinion, which means you’re likely to feel some movement across the structure. This makes sense considering how bouncy the mattress is, but could be something for couples to consider!
Brentwood Latex Hybrid Vs.
Now that we’ve got a pretty good idea of what’s going on in the Latex Hybrid mattress, let’s take a moment to discuss two of Brentwood’s other beds: the Cedar and Oceano.
- Like the Latex Hybrid, the Cedar uses all-natural materials to establish a vibe that’s both cozy and good for the environment. However, I’d say it’s much firmer than the Latex Hybrid, thanks to its tall section of pocketed coils.
- For that reason, I’d recommend the Cedar for those in need of extra firm support at the shoulders, hips, and lower back.
- Additionally, the Cedar is quite bouncy, so could be a nice fit for combo sleepers who need to move around and change positions in the night.
- For more on this model, check out my full review of the Brentwood Cedar mattress.
- Of the Brentwood models discussed here, the Oceano is probably the softest, thanks to its gentle pillow top layer.
- That being said, the Oceano is still a highly supportive mattress, so would probably work best for back sleepers.
- It’s also got excellent motion transfer and edge support, marking it as a solid option for couples.
- Get all the details at my full review of the Brentwood Oceano mattress.
Well folks, we’ve officially reached the end of this review. After going over every inch of this bed with a fine-tooth comb, it’s time for you to decide: Is the Brentwood Latex Hybrid mattress right for you? While I can’t make that decision for you (sorry!), I can leave you with a few final pros and cons to help you get there on your own.
Brentwood Latex Hybrid Pros
- One of the things I like most about the Brentwood Latex Hybrid is that it’s built with organic materials. This means it could be a great fit for eco-friendly sleepers!
- Additionally, I think this mattress could be a slam dunk for back/side combo sleepers as it provides both deep pressure relief and buoyant support.
- And finally, this could be a great bed for couples. Not only does it feature excellent edge support, but it sleeps cool, so should be able to dissipate the body heat of two or more sleepers with ease.
Brentwood Latex Hybrid Cons
- Unfortunately, I don’t think this would be a suitable bed for stomach sleepers. These folks tend to prefer ultra-firm structures that lift the hips in line with the shoulders, which this mattress doesn’t quite do.
- As we discussed in the material section, the zoned support layer features foam ridges at the shoulders. They didn’t bother me personally, but you can definitely feel them when you apply pressure to the area.
- Trial – 1 Year
- Warranty – 25 Years
- Shipping – Free + Compressed
How Much Does The Brentwood Hybrid Latex Mattress Cost?
|Twin||39" x 75" x 12"||$799|
|Twin XL||39" x 80" x 12"||$849|
|Full||54" x 75" x 12"||$1,049|
|Queen||60" x 80" x 12"||$1,099|
|King||76" x 80" x 12"||$1,299|
|Cali King||72" x 84" x 12"||$1,299|
|Split King||39" x 80" x 12" (x2)||$1,698|
Do latex mattresses make you sweat?
Latex foam is a naturally cooling material, so works to actively dissipate body heat evenly throughout a structure. Many hot sleepers prefer latex foam to other materials because of its cooling power!
How long can I leave my mattress in the box?
Generally, I recommend that folks un-box their mattress within two months of purchase. Otherwise, you may permanently disrupt the shape and compression of your bed.
Do Brentwood mattresses need a box spring?
Not unless you want one! Brentwood mattresses are designed to sit on either the floor or a traditional bed frame. However, if you want to add a little extra height to your sleeping structure, you’re welcome to place your Brentwood mattress on a box spring.